Bowlman Lantern Bong
Water pipes & bongs
by Hemper
We'll only email you about this product — no marketing.
Bowlman Lantern Bong — Campfire Vibes, Showerhead Smoothness
The Bowlman Lantern Bong is a borosilicate glass water pipe shaped like a camping lantern, fitted with a showerhead percolator for filtered, cooled hits. Available in 7-inch and 10-inch sizes, it pairs novelty design with genuinely functional filtration — thick glass walls, a flame splash guard, and a 14mm female joint that accepts standard bowls and accessories. It looks like something you'd hang outside a tent. It hits like something you'd hide inside one.
Which Size Should You Pick?
| Variant | Height | Best For | SKU |
|---|---|---|---|
| 7-inch | Approx. 18 cm | Compact sessions, easy storage, travel-friendly | HS2368 |
| 10-inch | Approx. 25 cm | Bigger chamber, more cooling, smoother draws | HS2369 |
If you mostly smoke at home and want the smoothest possible hit, go for the 10-inch. The extra chamber volume gives the showerhead percolator more room to do its job — you'll notice the difference on longer draws. The 7-inch is the one we'd grab for a weekend away or if shelf space is tight. Both share the same 5mm glass thickness and 14mm joint, so accessories swap between them without any fuss.
Why the Bowlman Lantern Bong Belongs on Your Shelf
Most novelty bongs sacrifice function for looks. You get a funny shape and a rough pull that makes you cough your lungs out. The Bowlman Lantern Bong actually gets the balance right. The showerhead percolator — that disc with multiple slits sitting in the base — breaks your smoke into dozens of tiny bubbles before it reaches your mouth. More bubble surface area means more contact with water, which means cooler, cleaner draws. It's not just a gimmick shaped like a lantern; it's a properly engineered piece of glass that happens to look like one.
The 5mm borosilicate glass walls are thick enough that you won't panic every time you set it down on a hard surface. We've seen thinner bongs crack from a light tap against a table edge — this one can handle normal life. The flame splash guard is a small but smart addition: it stops water from creeping up and reaching your bowl or, worse, your lighter hand. If you've ever inhaled bong water because you filled the base a touch too high, you know exactly why this matters.
The honest limitation? The lantern shape means the base is a bit narrower than a standard beaker bong of the same height. The 7-inch version especially can be slightly top-heavy if you load a chunky bowl. Keep it on a flat surface and you'll be fine, but don't balance it on the arm of your sofa. We'd also mention that novelty pieces can be trickier to clean — the lantern contours have a few nooks. A good soak in isopropyl alcohol and coarse salt sorts it, but it's not a 30-second rinse job.
Build Quality and Materials
The Bowlman Lantern Bong is made from borosilicate glass — the same type used in laboratory equipment and high-end cookware. Borosilicate has a low coefficient of thermal expansion, which in plain English means it doesn't crack when you hit it with a lighter flame right after running it under cold water. The 5mm wall thickness puts it in the mid-to-heavy range for bongs this size. For comparison, budget pieces often come in at 3mm, while the thickest scientific glass runs 7-9mm. At 5mm, you get solid durability without the bong weighing a brick.
The showerhead percolator is fused into the downstem area, not a removable insert. That's a plus — fewer loose parts means fewer things to break or misplace. The 14mm female joint sits at a 45-degree angle on the 7-inch and a 90-degree angle on the 10-inch, both accepting standard 14mm male bowls and accessories. A glass bowl is included with each piece.
| Specification | Detail |
|---|---|
| Material | Borosilicate glass |
| Wall thickness | 5 mm |
| Available heights | 7 inches (18 cm) / 10 inches (25 cm) |
| Joint size | 14mm female |
| Joint angle | 45-degree (7") / 90-degree (10") |
| Percolator type | Showerhead |
| Splash guard | Yes — flame splash guard |
| Included | Glass bowl (14mm male) |
| SKU (7") | HS2368 |
| SKU (10") | HS2369 |
Complete your setup with a few extras. A set of pipe screens keeps ash out of the percolator and makes cleaning far less frequent. If you want to switch to concentrates, a 14mm quartz banger drops straight into the joint — no adaptor needed. And a decent bottle of bong cleaner or isopropyl alcohol is worth having on hand from day one. Your future self will thank you after the first deep-clean session.
How to Use the Bowlman Lantern Bong
- Fill the base with water through the mouthpiece opening. Pour slowly until the water level sits roughly 1-2 cm above the slits of the showerhead percolator. You want the slits submerged — that's where the filtration happens — but not so high that water splashes up into the neck.
- Insert the included 14mm glass bowl into the joint. Give it a gentle twist to seat it properly. Don't force it — glass-on-glass joints are ground to fit snugly without pressure.
- Pack your bowl loosely. Break your material up by hand or with a grinder, and fill the bowl without pressing down hard. Airflow is everything — a packed-tight bowl restricts the draw and makes you work harder for less smoke.
- Place your mouth over the top opening and light the edge of the bowl while inhaling gently. You'll see bubbles forming through the showerhead percolator. Start slow — the percolator does the work of cooling and filtering, so there's no need to pull like you're trying to start a lawnmower.
- Once the chamber fills with smoke, lift the bowl from the joint (this acts as the carb) and inhale the cleared chamber. Replace the bowl when you're done.
- After your session, pour out the used water and rinse the base with warm water. For a deeper clean, fill with isopropyl alcohol (90%+) and coarse salt, cover the openings, shake for 60 seconds, then rinse thoroughly. The lantern shape has a few curves that trap residue, so a weekly soak keeps things fresh.
From Our Counter: What We Actually Think
We've sold hundreds of novelty bongs over the years. Most of them end up on a shelf as decoration within a month because the smoking experience is mediocre. The Bowlman Lantern Bong is one of the few we'd actually use regularly. The showerhead perc genuinely works — you can feel the difference compared to a basic downstem piece. Draws are noticeably smoother, and the splash guard earns its keep. It's not going to replace a full-size scientific rig with triple percolation, but that's not what it's trying to be. For a themed piece at this price point, it punches above its weight.
If you want something with even more filtration, look at a piece with a tree percolator or a honeycomb disc — we carry several in the water pipes section. But if you like the lantern aesthetic and want a bong that actually functions well on top of looking good, this is the one. We'd pick the 10-inch over the 7-inch for home use every time. The extra 3 inches of height translates to noticeably cooler smoke, and it feels more stable on a table.
Frequently Asked Questions
Is the Bowlman Lantern Bong suitable for beginners?
Yes, it's a solid first bong. The showerhead percolator smooths out the harshness that puts new users off, and the 14mm joint is the most common size, so finding replacement bowls or accessories is easy. Start with the 7-inch if you want something less intimidating.
How much water should I put in the base?
Fill until the water sits about 1-2 cm above the showerhead percolator slits. Too little and the perc can't filter properly; too much and you'll get water in your mouth. Pour through the top, take a test draw without lighting anything, and adjust from there.
Can I use the Bowlman Lantern Bong with concentrates?
You can, but you'll need to swap the glass bowl for a 14mm male quartz banger or nail. The joint size and angle are standard, so most 14mm concentrate accessories fit straight in. The showerhead perc works well for dabs — it filters without killing flavour.
How do I clean the lantern shape without breaking it?
Fill the base with 90%+ isopropyl alcohol and a tablespoon of coarse salt. Cover the joint opening and mouthpiece with your hands or silicone caps, then shake vigorously for 60 seconds. Let it soak for 30 minutes if residue is stubborn. Rinse with warm water. Avoid using boiling water — thermal shock can crack even borosilicate glass.
What's the difference between the 7-inch and 10-inch versions?
Same glass thickness (5mm), same percolator, same 14mm joint. The 10-inch has a larger chamber, which means more smoke volume and additional cooling before the hit reaches you. The 7-inch is more portable and easier to store. Both include a glass bowl.
Is 5mm glass thick enough to be durable?
For a bong this size, 5mm is solid. It won't survive a drop onto tiles, but it handles everyday use — setting it on tables, transporting it in a bag with padding, the occasional light knock. Budget bongs at 3mm feel fragile by comparison. Treat it with basic respect and it'll last years.
Does the showerhead percolator make a difference compared to a simple downstem?
A noticeable one. A basic downstem creates a few large bubbles. The showerhead breaks smoke into many smaller bubbles across multiple slits, increasing the water contact surface area. The result is cooler, smoother draws with less throat irritation. You'll feel it on the first hit.
Last updated: April 2026
