Dab rigs & tools
by Ispire
The Wand is a portable induction heater for dabbing from Ispire that replaces your butane torch with precise, adjustable electronic heating for concentrates. Dial in your exact temperature with a single button press, slot your 14mm borosilicate banger into the heating element, and get consistently flavourful, aromatic pulls without ever flicking a lighter. It also doubles as an induction heater for DynaVap devices with an adapter — one gadget, two uses. If you want to buy an induction heater for dabbing that works straight out of the box, The Wand ships with two bangers, a carb cap, inner cups, and a USB-C cable — everything you need to get started.
The Wand ships with 7 items — a genuinely complete kit at this price point, so you won't need to order a separate banger or carb cap to get started. Here's what you unbox:
| Item | Details |
|---|---|
| The Wand Induction Heater | Main unit with built-in battery and temperature dial |
| Angled Banger | 14mm borosilicate glass, angled neck |
| Straight Banger | 14mm borosilicate glass, straight neck |
| Inner Cups (x2) | Replaceable inserts for the bangers |
| Carb Cap | Restricts airflow for lower-temp dabs |
| USB-C Charger Cable | Standard USB-C — works with any USB-C adapter you already own |
| User Manual | Setup and temperature guide |
The Wand uses electromagnetic induction to heat the banger directly — no open flame, no guesswork. Here are the key specs:
| Spec | Value |
|---|---|
| Brand | Ispire |
| SKU | VS0351 |
| Heating Method | Electromagnetic induction |
| Banger Compatibility | 14mm borosilicate glass |
| Charging | USB-C |
| Temperature Range | Approximately 260–370°C adjustable |
| Charge Time | Approximately 2 hours from empty |
| Temperature Control | Adjustable via button interface |
| Additional Compatibility | DynaVap devices (adapter required) |
| Bangers Included | 2 (angled + straight) |
Already own a DynaVap? The Wand pairs brilliantly with it — just grab the compatible adapter and you've got a flame-free induction heater for dabbing and dry herb that works at home or on the go. If you're building out a dabbing setup, browse our dab rigs and tools for compatible rigs, mats, and accessories. The Storz & Bickel Plenty vaporizer is also worth a look if you want a dedicated desktop dry herb option alongside your dab rig.
An induction heater for dabbing eliminates the guesswork of torch-based temperature control — the single biggest factor in dab quality. Here's the thing about torches: they work, but they're blunt instruments. You heat the banger until it glows, wait an arbitrary number of seconds, hope you've landed in the right temperature window, and dab. Too hot and your concentrate combusts — you get a harsh, burnt-tasting pull that wastes material and irritates your throat. Too cold and you're left with a puddle of unvaporised concentrate sitting in the banger. We've watched customers go through this cycle for years, and the frustration is always the same.
The Wand sidesteps all of that. Induction heating means the electromagnetic field heats the banger itself — not the air around it, not your fingers, not the table. You set your temperature, press the button, and the banger reaches that temperature consistently every single time. No more counting "Mississippi-one, Mississippi-two" after torching. No more scorched terps. The flavour difference on a proper low-temp dab is night and day: you actually taste the concentrate's terpene profile instead of just tasting heat. According to the European Monitoring Centre for Drugs and Drug Addiction (EMCDDA), vaporisation at controlled temperatures is increasingly recognised as a harm-reduction approach compared to combustion methods.
The honest limitation? You're tied to 14mm bangers. If your rig uses an 18mm joint, you'll need a glass adapter or a different banger setup. And the battery, while decent for home sessions, will need a top-up if you're planning a long evening. Keep the USB-C cable handy. That said, compared to refilling butane canisters and dealing with inconsistent torch flames, this is a significant upgrade in both convenience and results.
Setup takes about 2 minutes from unboxing to your first dab. No torch fuel, no learning curve beyond reading the temperature dial.
For DynaVap use: slide the DynaVap adapter onto The Wand's heating element, insert your DynaVap cap-first, and heat until the click. Same precision, no torch needed.
Staff have tested The Wand against standard butane torches over dozens of sessions, and the consistency difference is immediately obvious. We've had customers come in frustrated with dabbing entirely — they'd bought a decent rig, good concentrates, and still ended up with harsh, underwhelming hits. Nine times out of ten, the problem was temperature control. A butane torch puts out somewhere around 1,300°C at the flame tip. Your concentrate wants to be vaporised at maybe 260–370°C depending on the material. That's a gap of roughly 930°C to bridge by guesswork and timing alone.
The Wand has a noticeable heft to it — the weight actually aids positioning stability when you're holding it over a banger. The button interface is simple: no apps, no Bluetooth pairing, no firmware updates. Just click and dial. Compared to the Dr. Dabber Switch (which runs at a higher price and uses a proprietary cup system), The Wand's 14mm banger compatibility makes it more versatile with existing rig setups. If you've been using a torch and you're tired of the inconsistency, order The Wand as the best upgrade for dabbing precision in our kit. If you want something even more portable and don't mind a smaller form factor, the DynaVap VapCap M with a compact induction heater is worth a look — but for dedicated rig use at home, The Wand is the one we'd pick.
It works with any rig that accepts a 14mm banger joint. Both an angled and straight banger are included, so most standard rigs are covered. If your rig uses an 18mm joint, you'll need a glass reducer adapter — they're cheap and widely available.
You'll get multiple sessions from a full charge — enough for a solid evening's use. Heavy users who dab frequently in one sitting should keep the USB-C cable nearby. Charging from empty takes roughly 2 hours.
Yes. You need a compatible DynaVap adapter (not included) that fits over The Wand's induction element. Insert your DynaVap cap-first, heat until you hear the click, and you're sorted. It's one of the cleanest ways to use a DynaVap without a torch.
Somewhere around 260–315°C gives you the most flavour and smoothest pulls. Higher temps (315–370°C) produce denser vapour but sacrifice some terpene nuance. Start low and adjust upward until you find your sweet spot.
No open flame means no risk of burns from a torch, no butane fumes, and no risk of accidentally leaving a lit torch on the table. The banger itself still gets hot — don't touch it — but the overall process is significantly more controlled than torching.
Swab the inside of the banger with a cotton swab while it's still slightly warm after each dab. For deeper cleaning, soak the banger in isopropyl alcohol for 15–30 minutes, then rinse with warm water. Regular cleaning keeps flavour clean and extends the life of the glass.
Two inner cups are included. Over time, residue buildup and thermal stress can degrade them. How often you replace them depends on how frequently you dab and how well you clean after each session. With regular swabbing, they last a good while.
Last updated: April 2026
