Vape accessories
by DynaVap
The DynaKit Basic is a complete maintenance and replacement parts kit for DynaVap vaporizers, packed with screens, O-rings, wax, storage tubes, and a fat mouthpiece. If you've been using your DynaVap daily and the draw feels off, the cap wobbles, or the O-rings look flattened — this one box sorts it all out in about five minutes.
The DynaKit Basic includes every consumable part your DynaVap will eventually need. Here's the full breakdown:
| Item | Quantity | Purpose |
|---|---|---|
| Stainless Steel CCD Screens | 3 | Filter fine particles without restricting airflow |
| Fat Mouthpiece | 1 | Adapts any DynaVap to a 14 mm water piece joint |
| Condenser O-Rings | 3 | Full condenser ring replacement for any DynaVap |
| High-Temp O-Rings | 5 | Complete replacement set for any DynaVap tip |
| DynaWax | 1 | Lubricates O-rings and preserves wooden components |
| Plastic Storage Tubes | 2 | Store and transport any standard-length DynaVap |
That's 14 individual parts plus the wax. Enough to fully refresh one DynaVap and still have spares left for next time.
O-rings are the first thing to go on any DynaVap — and when they do, you'll notice immediately. A worn condenser O-ring means air leaks around the stem, so you end up pulling harder for less vapour. Flattened tip O-rings let the cap sit loose, which throws off the click timing and can lead to uneven heating or accidental combustion. Neither situation is great.
We've seen customers come in thinking their DynaVap is broken when it's actually just a 50p O-ring that's lost its seal. The CCD screens clog up over time too — residue builds between the perforations and chokes the airflow. Swapping in a fresh screen is the single quickest way to bring a tired DynaVap back to life. Three screens in this kit means you can rotate them while cleaning, or just replace outright every few weeks if you're a heavy user.
The DynaWax is the bit most people skip and shouldn't. A thin coat on your O-rings before installation stops them cracking from heat cycling. If you've got a VonG or any DynaVap with a wooden sleeve, the wax conditions the wood and stops it drying out. One tin lasts months — you only need a fingertip's worth each time.
| Spec | Value |
|---|---|
| Brand | DynaVap |
| SKU | VS0450 |
| Compatible Models | B Series, M Series, VonG, VonG (i), all standard DynaVap devices |
| Screen Material | Stainless steel |
| Total O-Rings | 8 (3 condenser + 5 high-temp tip) |
| Mouthpiece Fit | 14 mm female water piece joint |
| Storage Tube Length | Standard DynaVap length |
| Total Parts Count | 14 + DynaWax |
Running the DynaKit Basic through a water piece? The Fat Mouthpiece included here fits 14 mm joints, but if you're after a dedicated glass setup, pair this with a DynaVap-compatible bubbler for smoother, cooler draws. Already sorted on parts and want to upgrade the heating side? The DynaVap Induction Heater removes the torch entirely and gives you consistent clicks every time.
We'd call this the best maintenance kit for any DynaVap user who wants one box that covers everything. The 8 O-rings alone would cost nearly as much bought individually, and you're getting screens, wax, a mouthpiece, and storage tubes on top. The one limitation: if your condenser itself is bent or your tip has visible warping from repeated overheating, O-rings and screens won't fix a structural issue. You'd need a replacement condenser or tip for that. But for the 95% of DynaVap problems that come down to worn consumables, this kit is the answer.
The plastic storage tubes are a nice touch that people overlook. They're sized for standard-length DynaVaps — the M, the B, the VonG — and they're surprisingly sturdy. Toss one in a bag or jacket pocket without worrying about the cap popping off or pocket lint getting into the condenser. Not the fanciest carrying case, but functional and free with the kit.
Yes. The O-rings, CCD screens, and fat mouthpiece are universal across all current DynaVap models, including the M 2024, B Series, VonG, and VonG (i). DynaVap designed the kit to be cross-compatible.
Every 2–3 months with daily use, sooner if you notice air leaks or the cap feeling loose. The high-temp O-rings on the tip degrade faster than the condenser rings because they sit closer to the heat source. A quick DynaWax application at each swap extends their life.
No. The fat mouthpiece included in the DynaKit Basic is sized specifically for 14 mm female joints. For 10 mm joints, you'd need a separate adapter — DynaVap sells a 10 mm mouthpiece individually.
DynaWax is a conditioning balm that lubricates O-rings so they seat properly and resist cracking from heat cycles. It also moisturises and protects wooden components on models like the VonG. You need very little — a fingertip's worth per full O-ring replacement.
Identical. They're the same stainless steel CCD screens DynaVap includes with every new device — precision-perforated to filter particulate without choking airflow. Three screens means you can rotate one in while cleaning another.
No tools required. Everything in the DynaKit Basic installs by hand. The O-rings roll on, the screens press in with the back of a pen or the cap itself, and the fat mouthpiece just slides onto the condenser. The whole refresh takes about 5 minutes.
They're sized for standard-length DynaVaps without the fat mouthpiece. With the fat mouthpiece on, the device is slightly too wide for the tube opening. Pop the mouthpiece off, store it separately, and the DynaVap slides right in.
Last updated: April 2026
