Vape accessories
by Storm
The Storm Mouthpiece is a replacement mouthpiece for the Storm vaporizer that features improved airflow over the original design. It clicks straight into your Storm unit with zero fuss, giving you a noticeably smoother draw. Whether your current mouthpiece has seen better days or you just want a spare on hand for sharing with mates, this is the part you need.
Mouthpieces are the first thing to go on any portable vaporizer. They collect residue, they get chewed, they roll off tables and disappear under sofas. We've seen customers nurse a gunked-up mouthpiece for months because they didn't realise replacements existed — and then wonder why their Storm doesn't taste as good as it used to. That's not the vaporizer giving up. That's resin buildup choking your airflow.
A fresh Storm mouthpiece restores the draw resistance to factory spec. The improved airflow design on this version means the vapour path is slightly more open than the mouthpiece that originally shipped with earlier Storm units. You'll feel the difference on the inhale — less pull required, more consistent vapour density from the first draw to the last. It's a small plastic part that makes a disproportionate difference to how your sessions feel.
The other reason to grab one: hygiene. If you're passing your Storm around at a gathering, having a second mouthpiece means you can swap between users. Not glamorous, but practical. We've been selling vaporizer accessories since the early days and the single best upgrade for any portable vape is always the same — a clean mouthpiece. It weighs almost nothing, costs almost nothing, and the improvement is immediate.
| Spec | Detail |
|---|---|
| Compatible vaporizer | Storm |
| Type | Replacement mouthpiece |
| Feature | Improved airflow design |
| SKU | VS0180 |
| Material | Food-safe plastic |
| Fit | Push-fit, no tools required |
Complete your Storm setup — the Storm Glass Mouthpiece is worth a look if you want an even cooler draw, and the Storm Water Adapter lets you run your vaporizer through a bubbler for filtered vapour. If your battery is flagging after a year of use, the Storm Replacement Battery brings your unit back to full power.
A clean mouthpiece is the difference between tasting your botanicals and tasting last week's session. After every 5–10 uses, pop the mouthpiece off and soak it in isopropyl alcohol (90% or higher) for 15–20 minutes. A pipe cleaner or small brush gets into the airflow channel where residue builds up fastest. Rinse thoroughly with warm water and let it dry completely before reattaching.
One honest limitation: the plastic mouthpiece will stain over time no matter how diligently you clean it. It still works perfectly — it just won't look brand new forever. If aesthetics matter to you, the Storm Glass Mouthpiece is the upgrade path. Glass doesn't stain, it's easier to see when it needs cleaning, and it cools the vapour a touch more. But for pure functionality and durability — especially if you're prone to dropping things — this plastic version is the practical choice.
| Feature | Storm Mouthpiece (plastic) | Storm Glass Mouthpiece |
|---|---|---|
| Material | Food-safe plastic | Borosilicate glass |
| Durability | Drop-resistant | Fragile — handle with care |
| Vapour cooling | Standard | Slightly cooler draw |
| Cleaning | Isopropyl soak, brush | Isopropyl soak, visually clear |
| Staining | Stains over time | Stays clear |
| Best for | On-the-go, sharing, daily use | Home sessions, flavour chasers |
We get asked about mouthpiece compatibility more than almost any other vaporizer question. The Storm Mouthpiece fits the Storm vaporizer specifically — it won't fit the Sapphire, the Sapphire+, or other brands, even if they look similar. If you're unsure which vaporizer you have, check the base of the unit for the Storm branding. The Storm is also sometimes cross-referenced with the XMax V2 Pro, and this mouthpiece fits that unit as well. Same device, different label.
The feel in your hand is exactly what you'd expect — lightweight, smooth plastic, about the size of a pen cap. It doesn't add any noticeable weight to the vaporizer. The improved airflow channel is slightly wider than the original version, which you can see if you hold both side by side and look down the bore. It's not a dramatic redesign, but the draw is noticeably less restricted. According to research on airflow and inhalation devices, mouthpiece design directly affects deposition and delivery consistency (PMC, 2024) — so even small improvements in the air path geometry make a measurable difference to your experience.
Yes. The Storm and the XMax V2 Pro are the same vaporizer sold under different brand names. This mouthpiece fits both units identically — same push-fit connection, same dimensions.
With regular cleaning every 5–10 sessions, a single mouthpiece lasts 6–12 months of daily use. Replace it when the airflow feels restricted even after a thorough clean, or if the plastic has cracked or warped.
No. The Sapphire and Sapphire+ use a different mouthpiece design. This part is only compatible with the original Storm (and XMax V2 Pro). Check the Sapphire Glass Mouthpiece if you own that model.
This version has an improved airflow channel — slightly wider bore for a less restricted draw. It's a direct replacement that fits exactly the same way, just pulls a bit easier.
Remove it from the vaporizer, soak in 90%+ isopropyl alcohol for 15–20 minutes, scrub the airflow channel with a pipe cleaner, rinse with warm water, and dry completely before reattaching. Do this every 5–10 sessions for the best flavour.
Yes. The Storm Mouthpiece is made from food-safe plastic rated for the operating temperatures of the Storm vaporizer (up to around 220°C). It won't degrade or off-gas during normal use.
Absolutely — that's one of the main reasons people grab a spare. Each person gets their own mouthpiece, you swap them out between users, and everyone gets a hygienic draw. Just rinse them between sessions.
Last updated: April 2026
