Shower Head Pyramid Dab Rig 10" (Tsunami Glass)

Shower Head Pyramid Dab Rig 10" by Tsunami Glass

The Shower Head Pyramid Dab Rig 10" is a compact borosilicate glass concentrate rig that filters vapour through a slitted showerhead percolator for noticeably smoother, cooler hits. Built by Tsunami Glass from 3mm thick borosilicate with a striking curved pyramid silhouette and purple accent highlights, this piece looks like it should cost twice what it does. At just 10 inches tall, it sits comfortably on a desk or side table and travels without drama — toss it in a padded bag and you're sorted.

Why This Pyramid Dab Rig Earns Its Spot on the Shelf

Most rigs under 12 inches fall into two camps: either they look decent but hit like breathing through a straw, or they rip properly but resemble a chemistry experiment gone wrong. The Shower Head Pyramid Dab Rig from Tsunami Glass threads the needle between form and function — and that's genuinely hard to find at this price point.

The showerhead percolator is the engine here. Water gets forced through multiple slits at the base of the central chamber, breaking your vapour into dozens of tiny bubbles. More surface area touching water means more cooling and more filtration before anything reaches your lungs. You can hear the difference — a satisfying, even churn rather than a single aggressive glug. The result is a hit that's noticeably less harsh on the throat, especially with concentrates where vapour density can catch you off guard.

Then there's the build. We've handled a lot of budget glass over the years, and 3mm borosilicate is the sweet spot for a rig this size — thick enough to survive a knock against the coffee table, light enough to hold comfortably in one hand. The polished seams are a nice touch too. Run your finger along the joints and you won't find rough edges or uneven welds. Tsunami Glass clearly runs proper quality control on these, which isn't always a given with sub-premium brands.

The honest limitation? At 10 inches with a single percolator, this isn't going to deliver the same level of diffusion as a 16-inch double honeycomb rig. That's physics, not a flaw. But for concentrates especially — where you want flavour preservation alongside smooth delivery — a single showerhead perc in a compact chamber actually works in your favour. Less water volume means less flavour gets stripped out on the way up.

From Our Counter: What We Actually Notice

Pick this rig up and the first thing you register is the weight — it's lighter than you'd expect from the photos, which makes sense given the 3mm walls and the tapered pyramid shape. The purple accents catch light nicely; they're worked into the glass rather than painted on, so they won't chip or fade. The base is wide and flat relative to the body, which gives it decent stability on a table. We've seen taller, narrower rigs topple from a stiff breeze. This one stays put.

The showerhead perc sits about 2 inches above the base, so you don't need much water — fill until the slits are just submerged, roughly 1.5 to 2 cm above the perc. Overfill it and you'll get splashback. Underfill and the percolation sounds thin and reedy. When you hit that sweet spot, though, the draw resistance is low and the bubbles stack evenly. It's a satisfying piece to use.

Compared to something like the Tsunami Concentrate Rig Showerhead Swiss 9", the Pyramid gives you an extra inch of height and a wider chamber, which translates to slightly more cooling. The Swiss has a more intricate look with its hole pattern, but functionally they perform similarly. If aesthetics matter to you — and they should, you're going to stare at this thing — the pyramid silhouette is the more distinctive of the two.

How to Use the Shower Head Pyramid Dab Rig

1. Fill the rig with water through the mouthpiece opening. Pour slowly until the water level sits approximately 1.5-2 cm above the showerhead percolator slits. Do a test draw without heating anything — if water touches your lips, pour a bit out.
2. Attach your banger or nail to the joint. Tsunami Glass rigs typically use a standard joint size, so check yours fits snugly before applying heat.
3. Heat your banger with a torch until it reaches your preferred temperature. For concentrates, most people find that heating for 25-30 seconds then letting it cool for 40-50 seconds delivers the best balance of flavour and vapour density. A lower temperature preserves terpene profiles; higher temperatures produce thicker clouds.
4. Apply your concentrate to the heated banger using a dab tool. Inhale slowly and steadily — the showerhead perc works best with a gentle, consistent draw rather than a hard pull.
5. Exhale and enjoy. Cap your banger between hits to retain heat if you're working through a larger dab.
6. After your session, empty the water and rinse the rig with warm water. For a deeper clean, use isopropyl alcohol (90% or higher) and coarse salt — shake gently, let it sit for 10-15 minutes, then rinse thoroughly. The pyramid shape makes it easy to swirl cleaning solution into the percolator chamber.

Keeping Your Dab Rig Clean

A clean rig is a flavourful rig — residue buildup in the percolator slits restricts airflow and muddies the taste of your concentrates. With a showerhead perc, those slits can clog faster than you'd think if you skip maintenance. We'd suggest a quick warm water rinse after every session and a full iso-salt clean once a week if you're using it daily. The 10-inch size actually works in your favour here: the chamber is small enough to clean thoroughly without wasting half a bottle of isopropyl.

One tip from years of selling glass: change your water every single session. Stale rig water doesn't just taste grim — it defeats the entire purpose of water filtration. Fresh water, clean slits, proper water level. That's the trifecta for getting the most out of any percolator rig.

Frequently Asked Questions

Last updated: April 2026