The VapoRig (EHLE)
Water pipes & bongs
by EHLE
The VapoRig by EHLE — Glass Water Filtration for Your Portable Vaporiser
The VapoRig is a compact glass water pipe designed specifically to pair with portable vaporisers, cooling vapour through water filtration for smoother, more flavourful draws. Built by EHLE — a German glassware brand with a reputation for clean, functional design — this 15cm rig bridges the gap between your handheld vape and the creamy, terpene-rich hits you get from a proper water piece. Think of it as a docking station for your vaporiser, minus the fuss of a full-size bong.
Why Run Your Vaporiser Through a VapoRig Water Pipe
Vapour straight from a handheld device is already cleaner than combustion smoke, but it can still feel dry and warm — especially at higher temperature settings. The VapoRig solves that in about two seconds: attach your vaporiser to the bowl joint, fill the chamber with water, and inhale. The vapour passes through the water before it reaches your lungs, cooling it down and adding a creamy texture that makes each draw noticeably smoother.
The real payoff is flavour. When vapour cools, terpenes come through more clearly. That sharp, peppery hit from a high-temp session softens into something you can actually taste — the citrus notes in a limonene-heavy strain, the pine from pinene, the earthy undertones you miss when you're wincing at dry heat. We've had customers come back and say it changed how they think about vaping entirely. That's not marketing fluff — water filtration genuinely rounds out the experience.
There's also a social angle. Unlike a traditional bong where everyone's stuck with the same bowl and lighter, the VapoRig lets each person dial in their preferred temperature on the attached vaporiser. One mate likes it low and terpy at 170°C, another wants thick clouds at 210°C — everyone gets their way without repacking anything.
Build and Design — What You're Actually Holding
At 15cm tall, the VapoRig sits lower than a pint glass. The flat, circular base keeps it planted on a table or desk — no wobbling, no anxiety about it tipping over during a session. The glass itself has that satisfying weight EHLE is known for: thick enough to feel solid in your hand, thin enough to stay elegant. You can feel the quality when you pick it up. It's not some flimsy novelty piece.
The angled mouthpiece is a small detail that makes a real difference. Instead of hunching over or craning your neck, you lean in naturally. It's the kind of ergonomic touch that separates a rig you use once from one that lives on your coffee table permanently.
One honest limitation: the bowl joint size matters. Most portable vaporisers fit with a standard adapter, but you'll want to double-check the joint diameter of your specific device before ordering. A 14.5mm or 18.8mm adapter covers the majority of popular vapes on the market, but oddball sizes exist. If you're unsure, drop us a message — we've matched hundreds of vapes to rigs over the years.
| Specification | Detail |
|---|---|
| Brand | EHLE (Germany) |
| Height | 15cm |
| Base shape | Flat and round — maximum stability |
| Mouthpiece | Angled for ergonomic use |
| Material | Borosilicate glass |
| Primary use | Water filtration for portable vaporisers |
| SKU | HS1284 |
Complete your setup: The VapoRig pairs brilliantly with any portable vaporiser in the shop. If you haven't picked one yet, the Storm Vaporizer Pen or the Flowermate range both slot onto glass rigs without hassle. Grab some pipe cleaners and isopropyl alcohol while you're at it — keeping the glass clean is half the battle for maintaining flavour.
How the VapoRig Compares to a Standard Bong
A regular bong combusts your herb. You light it, it burns, and you inhale smoke filtered through water. The VapoRig skips combustion entirely — your vaporiser heats the material to release active compounds without burning plant matter. The water filtration then cools and smooths what's already a cleaner draw.
| Feature | Standard bong | VapoRig with vaporiser |
|---|---|---|
| Heat source | Lighter / combustion | Vaporiser heating element |
| Vapour vs smoke | Smoke (combustion byproducts) | Vapour (no combustion) |
| Temperature control | None | Adjustable per user via vaporiser |
| Terpene clarity | Masked by smoke | Enhanced by water cooling |
| Height | Typically 25–45cm | 15cm — compact and portable |
| Cleaning frequency | Heavy resin buildup | Lighter residue — easier to maintain |
The residue difference alone is worth noting. Combustion leaves sticky tar and resin inside glass within a few sessions. Vapour leaves a fraction of that — mostly condensed moisture and trace plant oils. You'll still need to clean the VapoRig regularly (more on that below), but it stays cleaner for longer than any bong you've used before.
How to Use the VapoRig
- Fill the VapoRig chamber with cold water — just enough to submerge the downstem by about 1–2cm. Too much water and you'll get splashback; too little and you lose the filtration benefit.
- Attach your portable vaporiser to the bowl joint. Make sure the seal is snug — a loose connection means air leaks and weak draws. Use an adapter if your vaporiser's mouthpiece doesn't match the joint size directly.
- Load your vaporiser's chamber with your material of choice and set your preferred temperature. Lower temps (around 170–185°C) favour terpene flavour; higher temps (190–210°C) produce denser vapour.
- Press the power button on your vaporiser and wait for it to reach temperature — most devices take 15–30 seconds.
- Place your lips on the angled mouthpiece and inhale slowly. You should see bubbles forming in the water chamber as vapour passes through. Draw gently — the VapoRig's compact size means you don't need lung-busting pulls.
- Exhale and enjoy. Adjust the vaporiser temperature between draws to find your sweet spot.
- After your session, detach the vaporiser and empty the water. A quick rinse with warm water after each use keeps the glass clear. For a deeper clean, soak in isopropyl alcohol for 30 minutes once a week.
From Our Counter: What We've Noticed After Selling These
We've been stocking EHLE glass since before most online vape shops existed, and the VapoRig is one of those products that surprises people. Customers often pick it up expecting a gimmick — a bong that works with a vape, sounds like a novelty, right? Then they try it. The feedback we get most often is about the flavour difference. People who thought they knew what their vaporiser tasted like discover a whole new layer once the vapour passes through water. It's the same effect as drinking whisky neat versus with a drop of water — the cooling opens things up.
The 15cm height is deliberate. EHLE designed this to sit alongside portable vaporisers, not tower over them. It means you can use it on a sofa armrest, a low table, even outdoors on a picnic blanket without worrying about it toppling. That said, it's still glass — borosilicate is tough, but it's not indestructible. Don't throw it in a rucksack without padding.
One thing we'd flag: if your vaporiser has a very wide or proprietary mouthpiece (some Storz and Bickel models, for instance), you might need a specific adapter. Most standard vapes — Storm, Flowermate, XMAX, Boundless — connect without any fuss. When in doubt, measure the mouthpiece diameter before ordering.
Frequently Asked Questions
Which portable vaporisers are compatible with the VapoRig?
Most portable vaporisers with a standard 14.5mm or 18.8mm mouthpiece fit directly or via an adapter. Popular models from Storm, Flowermate, XMAX, and Boundless all work well. If your vaporiser has a proprietary mouthpiece shape, check the diameter or contact us — we've matched hundreds of devices to rigs over the years.
Does the VapoRig work with dry herb vaporisers only, or concentrates too?
It works with both, depending on what your vaporiser supports. If your handheld device handles concentrates, the VapoRig will filter and cool that vapour just as effectively as dry herb vapour. The rig itself is material-agnostic — it's the vaporiser doing the heating.
How often should I clean the VapoRig?
Rinse with warm water after every session to prevent residue buildup. Once a week (or every 5–7 sessions), soak the glass in isopropyl alcohol for 30 minutes, then rinse thoroughly. Vapour leaves far less residue than smoke, so maintenance is lighter than with a traditional bong.
Can I use the VapoRig as a regular bong with a bowl and lighter?
Technically yes — it has a standard glass joint, so you could fit a regular bowl piece. But at 15cm, it's quite compact for combustion use. EHLE designed it specifically for vaporiser pairing, and that's where it truly shines. If you want a dedicated combustion bong, we'd point you towards a taller EHLE piece instead.
Is 15cm too small for good water filtration?
Not at all. The VapoRig's chamber is sized to filter vapour effectively — you only need 1–2cm of water above the downstem. Vapour doesn't require as much cooling as hot combustion smoke, so a compact chamber actually works in your favour here. Less dead air space means denser, more flavourful draws.
Does water filtration reduce the potency of vapour?
Negligibly. Water primarily filters out heat and fine particulates, not active compounds. You might lose a tiny fraction of water-soluble molecules, but in practice, the difference is imperceptible. What you gain in smoothness and flavour clarity far outweighs any theoretical loss.
What type of glass is the VapoRig made from?
Borosilicate glass — the same heat-resistant material used in laboratory equipment and premium cookware. It handles temperature changes without cracking and is more durable than standard soda-lime glass. EHLE has been working with borosilicate for years, and the build quality reflects that.
Last updated: April 2026
