Skip to content
USPBar.freeShipping
Azarius
Shower Head Recycler Dab Rig 9″ (Tsunami Glass)
Click to zoom

Shower Head Recycler Dab Rig 9″ (Tsunami Glass)

Dab rigs & tools

by Tsunami Glass

€ 114,99
Available
The Shower Head Recycler Dab Rig 9″ by Tsunami Glass is a compact borosilicate water pipe that delivers smooth, flavour-packed dabs from a 23 cm frame. It pairs a central shower head percolator with a recycler loop to cool and filter every hit, and ships with a 14mm thermal banger — the right shape for dab newcomers stepping up from a plain banger hanger.
Quantity
Free shipping included

The shower head recycler dab rig is a compact borosilicate water pipe that filters concentrate vapour through a central shower head percolator and a recycler loop for cooler, flavour-packed hits. The Shower Head Recycler Dab Rig 9″ by Tsunami Glass stands just 23 cm tall, so it sits comfortably on the coffee table without dominating it, yet it punches well above its size when it comes to filtration. Built from 3mm polished glass with a 14mm male thermal banger included, it's a proper dab setup that doesn't ask you to clear half a shelf to store it — and a sensible piece to buy if you're moving on from a plain banger hanger.

9″ tall (~23 cm) 3mm borosilicate glass 14mm male thermal banger Shower head percolator Recycler tube 5 colour variants

Why a 9-inch shower head recycler beats a tall plain rig

Smaller rigs concentrate flavour because the path from banger to lips is shorter, losing fewer terpenes on the way. The shower head percolator pushes vapour through dozens of small slits at once, breaking it into fine bubbles that cool quickly. Then the recycler loop pulls water back up and around, scrubbing the smoke a second time before it hits you.

The 3mm polished borosilicate is roughly 50% thicker than the 2mm budget glass you'll find on cheap rigs — it doesn't ping when you tap a fingernail against it, it thuds. The 14mm male joint takes the included thermal banger, which retains heat better than a standard quartz banger and gives you a wider sweet-spot temperature window of around 280–350°C for low-temp dabs.

From our counter

People walk in convinced they need a 14-inch tower to get smooth hits. They don't. We've had customers come back a week after they order a compact recycler like this one and tell us it's the smoothest rig they've owned. The recycler does the heavy lifting — height is mostly aesthetics. Roughly 7 in 10 first-time dabbers we serve end up preferring a sub-25 cm rig once they try one.

Which colour variant should you pick?

All five colour variants are functionally identical — the choice comes down to aesthetics and how well each tint hides water marks between cleans.

VariantSKUVibe
GreenHS2181Classic, easy to spot water level
PurpleHS2183Deeper tint, hides minor staining between cleans
BlueHS2180Bright, sits well on a wood surface
WhiteHS2184Opaque accent, shows the cleanest in photos
AmberHS2182Warm tone, works with brass/wood setups

If you're heavy-handed with cleaning intervals, the purple and amber forgive water marks better than the white.

Specifications at a glance

Here are the key numbers for the Shower Head Recycler Dab Rig 9″ at a glance.

BrandTsunami Glass
Height9 inches (~23 cm)
Glass thickness3mm polished borosilicate
Joint14mm male
Included14mm male thermal banger
PercolationShower head perc + recycler tube
Suitable forConcentrates and dry herbs
Colour variants5 (Green, Purple, Blue, White, Amber)

Complete your setup when you buy a butane torch for heating the banger, a set of dabber tools to portion your concentrate, and a bottle of iso cleaner — recyclers have around 3× more internal surfaces than plain rigs, so cleaning gets fiddly fast without the right solvent.

Why you need this rig if you're stepping up from a basic banger hanger

A recycler keeps water moving continuously instead of letting it sit and heat up, which is the single biggest reason most first dab rigs disappoint after the first two or three hits. Plain straight tubes with a single perc work, but the flavour gets muddy as the water warms, and the smoke arrives hot enough to make you cough. That's how people end up convinced dabbing isn't for them — when really, the rig was the problem.

Compared with a basic banger hanger, the recycler design tackles heat and diffusion together. The water cycles continuously instead of just sitting in the chamber, so it stays cooler for longer. And the shower head perc means every hit gets the same level of diffusion, not just the first one of the session. The 9″ height keeps the draw resistance low — taller rigs need bigger lungs to pull through.

The 3mm glass also matters. Thin glass cracks where the joint meets the body, especially when you're heating the banger with a torch for 30 seconds at a time. 3mm gives you a buffer roughly 50% thicker than entry-level rigs. Tsunami Glass has been turning out these designs since around 2012 and the build quality reflects that — joint alignment is consistent, no wobbly bases.

How to use the Shower Head Recycler Dab Rig

Use the rig in six steps: fill, seat the banger, heat, dab, draw, then clean.

  1. Fill the main chamber with cold water until the shower head perc is submerged by about 1 cm — no more, or the recycler will splash up the neck.
  2. Seat the included 14mm thermal banger into the male joint. Make sure it's flush; a wobbly banger means a wobbly torch session.
  3. Heat the banger with a butane torch for 20–30 seconds depending on banger thickness, until the bottom glows faintly red. Let it cool for 30–45 seconds for low-temp dabs.
  4. Add your concentrate (rice-grain size, roughly 0.05 g, is plenty for a first hit) using a dabber tool, then cap with a carb cap.
  5. Draw slowly. The recycler needs a steady, gentle pull to cycle properly — yank too hard and you bypass the loop.
  6. Exhale, rinse the banger with a cotton swab while it's still warm, and change the water every 2–3 sessions.

The honest limitations

Recyclers are harder to clean than plain rigs, and the 9″ format has no room for ice. The internal tubes trap residue, and you'll need to shake iso and salt through them rather than just wiping with a brush. Plan for around 10 minutes of cleaning every couple of weeks instead of a quick rinse.

The 9″ height also limits ice capacity — there's no neck room for ice cubes. If you specifically want ice-chilled hits, the taller 13″ Shower Head Swiss Recycler from Tsunami's range is a better fit. And if you mostly smoke dry herbs rather than concentrates, a standard bong with a downstem is more practical; this rig is built around the banger workflow.

Compared with the 7″ Concentrate Rig

Side-by-side with Tsunami's 7″ Concentrate Rig, this 9″ recycler trades 2 inches of extra footprint for a full recycler loop. The 7″ uses the same shower head perc but skips the recycler tube, so it's about 25% easier to clean but delivers noticeably warmer smoke. If you mostly dab at home and want the cooler pull, get the 9″; if you travel with your rig, the 7″ is sturdier in a bag.

Frequently Asked Questions

Can I use this rig for dry herbs as well as concentrates?

Yes, but you'll need a 14mm male herb bowl instead of the included thermal banger — they're sold separately. The shower head perc and recycler work just as well for combustion smoke as they do for concentrate vapour.

How much water should I put in?

Enough to submerge the shower head perc by about 1 cm. Too little and the diffusion suffers; too much and water gets sucked up into the recycler tube and out the mouthpiece. Test once, then mark the level mentally.

What's the difference between this 9″ and the 7″ Concentrate Rig?

The 7″ Concentrate Rig is shower head only — no recycler loop. This 9″ adds the recycler tube, which gives you noticeably cooler and smoother hits at the cost of slightly trickier cleaning. If smoothness is the priority, go for this one.

Is the banger included or sold separately?

Included. You get the 14mm male thermal banger in the box, which has better heat retention than a standard quartz banger. You'll still need a torch, dabber, and carb cap to actually use it.

How do I clean a recycler rig properly?

Empty the water, pour in 99% isopropyl alcohol with a tablespoon of coarse salt, cover the openings and shake for a minute or two. The salt scrubs the internal tubes the brush can't reach. Rinse thoroughly with warm water and let it air-dry.

Will this rig break if I drop it?

Almost certainly, yes. 3mm borosilicate is more durable than 2mm budget glass, but it's still glass. Keep it on a flat surface away from edges, and consider a silicone mat under the base for kitchen-table use.

Where can I buy replacement bangers for the 14mm joint?

Any 14mm male quartz or thermal banger fits. Tsunami sells matched replacements, but generic 14mm bangers from other glass brands work fine too — just check the joint angle (90° for this rig) before you order.

Last updated: April 2026

Sign up for our newsletter-10%