Grow Tent Kit 80 (Pure Factory)

Grow Tent Kit 80 — Everything You Need in One Box

The Grow Tent Kit 80 from Pure Factory is a complete indoor growing setup containing an 80 x 80 x 160 cm tent, 150W LED light, carbon filter, dual fans, ducting, timer, and climate monitor — all pre-matched and ready to assemble. No hunting down compatible parts, no second-guessing whether your fan matches your filter diameter. You unbox it, assemble it, and you're ready to germinate.

We've sold plenty of tents, lights, and fans as separate pieces. And every time, someone emails asking "will this fan work with that filter?" or "is 150W enough for an 80x80?" This kit sidesteps all of that. Pure Factory matched every component to work together in this specific tent size, so you're not left with a 125 mm fan and a 100 mm filter opening. It just works.

From Our Counter: One of our team members ran this exact kit for a full cycle last autumn. His verdict? "I spent more time choosing seeds than setting up the tent." He had the whole thing assembled and running in under an hour — and that included a coffee break halfway through. The only thing he wished he'd bought upfront was a set of fabric pots, which aren't included.

What's Included in the Grow Tent Kit 80

The Grow Tent Kit 80 ships with eight matched components covering shelter, lighting, ventilation, odour control, and climate monitoring — nothing to source separately except your growing medium, pots, nutrients, and seeds.

That carbon filter is worth calling out. The Carbon Pure 100/200 handles 300 m³ of air — more than enough for an 80 x 80 x 160 cm space (roughly 1.02 m³ internal volume). Your room stays smelling like a room, not a grow op. The 100 mm diameter matches the inline extractor fan, so the connection is straightforward with the included 102 mm aluminium ducting.

The 150W LED — Enough Light for 0.64 m² of Canopy

The Luminaria PureLED Q150 delivers approximately 234W per square metre across the tent's 0.64 m² footprint, drawing 150W from the wall. That's a solid number for LED in this tent size. You're not going to scorch your plants, and you're not going to run your electricity bill through the roof either. Compared to a 250W HPS setup that would have been standard in this tent size a few years ago, you're saving around 100W per hour while generating far less heat.

Less heat means your extraction system doesn't need to work as hard to keep temperatures in the 22–26°C sweet spot. It also means the tent's 160 cm height is genuinely usable — you're not losing 30 cm of headroom to a massive HPS reflector radiating heat downward. The LED panel sits closer to the canopy without burning leaf tips.

One honest note: 150W of LED is solid for this tent size, but it's not going to compete with a 300W setup if you're chasing maximum density. For 2–4 medium plants in an 80 x 80, the Q150 does the job well. If you're planning to fill every square centimetre with a full ScrOG setup, you might eventually want to upgrade the light. But as a starting point for anyone looking to buy a grow tent kit 80 and get growing quickly? It's well-matched to the tent.

Airflow and Odour Control — The Part Most People Get Wrong

The kit's ventilation system cycles the tent's 1.02 m³ of air roughly 294 times per hour — far exceeding the minimum 60 exchanges most growers target. Without proper extraction, heat builds up, humidity spikes, and your plants sit in stale, CO₂-depleted air. The Grow Tent Kit 80 addresses this with two fans: a 100 mm Pure Inline Extractor Fan for active extraction and a Pure Fan TT for air movement.

The inline extractor pulls warm, humid air out through the Carbon Pure filter and 102 mm aluminium ducting, scrubbing odour as it goes. The 300 m³/h rating on the filter means deliberate overkill for this tent volume. It means the filter still works effectively even as the activated carbon ages over 6–12 months of use.

The 3 m of ducting gives you enough length to route exhaust air out of a window or into another room. Aluminium ducting is slightly noisier than insulated ducting when the fan is running at full speed, but it's lighter, cheaper, and easier to cut to length. If noise is a concern, you can always swap in insulated ducting later — the 102 mm diameter is standard.

How does this compare to buying components separately? According to the European Monitoring Centre for Drugs and Drug Addiction (EMCDDA), indoor cultivation setups have become increasingly standardised across Europe, and pre-matched kits like this one reduce the risk of ventilation mismatches that lead to mould, heat stress, and crop failure — problems that disproportionately affect first-time growers assembling parts ad hoc.

Climate Monitoring — Your Eyes Inside the Tent

The included Pure Factory Thermometer-Hygrometer displays real-time temperature and relative humidity — the two most critical environmental variables for indoor growing. Seedlings want 65–70% RH and 22–25°C. Vegetating plants do well at 50–60% RH. During flowering, you want to drop below 50% RH to reduce mould risk.

The analog timer handles your light schedule — 18 hours on / 6 hours off for vegetative growth, 12/12 for flowering. It's a simple dial timer, not digital. You set the pins, plug in the light, and forget about it. No programming, no menus, no dead batteries. We've seen digital timers glitch and leave lights on for 24 hours straight, which throws plants into stress. The analog approach is less elegant but more reliable.

Why the 80 x 80 Is the Sweet Spot for Home Growers

An 80 x 80 cm tent fits 2–4 plants in 11-litre pots with enough room for hands-on maintenance, making it the most practical size for a first indoor grow. A 60 x 60 cm tent feels cramped the moment you put two plants inside — your hands barely fit between the pots and the walls when you're watering or training branches. A 120 x 120 cm tent is brilliant if you've got the space, but it needs a more powerful light (250W+), a bigger carbon filter, and more ducting. The cost jumps significantly.

At 80 x 80 cm, the 160 cm height accommodates plants up to about 80–90 cm tall once you account for pot height, the LED panel, and a sensible light-to-canopy distance of 30–40 cm. That's plenty for most indica-dominant strains and well-trained sativas.

The reflective mylar interior bounces light back onto your plants from all four walls. You can feel the difference between proper mylar and the cheap silver-painted interiors on budget tents — mylar is smooth and mirror-like, while painted interiors look dull and absorb more light than they reflect. The zip door on this tent opens wide enough to access the full interior without contorting yourself.

An honest limitation worth mentioning: the 160 cm height is the kit's main constraint. Tall sativa-dominant strains can outgrow this tent if you don't train them early. If you know you want to grow lanky genetics, consider topping or LST from the third node onward, or look at a taller tent option. For most growers running indica-leaning hybrids, though, 160 cm is workable.

How to Set Up Your Grow Tent Kit 80

Assembly takes approximately 45–60 minutes with no tools required for the frame, following these eight steps from unboxing to first germination.

1. Assemble the steel frame inside the tent fabric. The poles slot together without tools — lay out the base rectangle first, then add the vertical poles and top frame. The whole structure clicks into place in about 15 minutes.
2. Position the tent in its final location before adding equipment. Once loaded, it's awkward to move. Choose a spot near a power outlet with enough clearance to open the zip door fully. A flat, stable surface is critical — uneven floors make the frame wobble.
3. Hang the Luminaria PureLED Q150 from the top frame using the included hanging hardware. Start with the light about 40 cm above where your canopy will be. You'll adjust this as plants grow.
4. Mount the Carbon Pure filter inside the tent near the top, connected to the 100 mm inline extractor fan with the aluminium ducting. Hot air rises, so top-mounting the filter captures the warmest, most humid air first. Route the ducting out through one of the tent's duct ports.
5. Position the Pure Fan TT inside the tent to create air circulation across the canopy. A gentle breeze strengthens stems and prevents hot spots from forming under the LED.
6. Place the thermometer-hygrometer at canopy height — not on the floor, not at the top of the tent. You want to know what your plants are experiencing, not what the air 60 cm above them is doing.
7. Plug the LED light into the analog timer. Set your light schedule: 18/6 for veg, 12/12 for flower. Plug the extraction fan directly into the wall — it should run continuously.
8. Add your pots, growing medium, and seeds. Water in, close the tent, and let the environment stabilise for a few hours before germinating. Check temperature and humidity readings to confirm you're in range (22–26°C, 60–70% RH for seedlings).

Specifications

The Grow Tent Kit 80 measures 80 x 80 x 160 cm and includes all ventilation, lighting, and monitoring components listed below.

Frequently Asked Questions

Last updated: April 2026