Cultivation supplies
by Unbranded
We'll only email you about this product — no marketing.
A measuring cup is a graduated plastic container that lets you portion liquids down to the exact millilitre — no guessing, no waste. This 1-litre measuring cup features clear 100ml interval markings running up the side, so you can read volumes at a glance. If you're mixing nutrients, preparing substrate solutions, or topping up a humidifier, this is the tool that keeps your measurements honest.
| Spec | Value |
|---|---|
| Material | Plastic |
| Capacity | 1000 ml |
| Graduation intervals | Every 100 ml |
| SKU | SH0153 |
| Weight | Lightweight (handheld) |
| Primary use | Gardening, substrate preparation, nutrient mixing |
Complete your grow setup: pair this measuring cup with a mushroom grow kit and a misting bottle. Accurate nutrient dosing and consistent humidity are the two things that separate a clean flush from a failed tub — this cup handles the first half of that equation.
Eyeballing liquids is one of those habits that works until it doesn't. We've seen growers dump twice the recommended nutrient concentration into a substrate soak and wonder why their mycelium stalled. The margin between "enough" and "too much" is often just 50–100 ml, and your eye simply can't judge that reliably in a bucket or bottle.
According to a study on accuracy and precision of fluid volume measurement, the type of container used has a measurable effect on pouring accuracy — participants were significantly less precise when using unmarked or poorly graduated vessels (PMC8859054). That tracks with what we see behind the counter: growers who measure properly lose fewer batches. It's that straightforward.
The honest limitation? This is a basic plastic measuring cup — it's not borosilicate glass, it won't survive a drop onto tiles the way a thick Pyrex jug would, and the markings will fade over time if you scrub them aggressively. But for the price, you'd buy three before you'd invest in a lab-grade graduated cylinder. It does the job, it's light enough to hold one-handed while you pour with the other, and it rinses clean in seconds. That's all you need from a measuring cup at this price point.
The number one mistake isn't using the wrong amount — it's not measuring at all. People grab a kitchen mug, fill it "about halfway," and call that 250 ml. According to a study published in Drug, Healthcare and Patient Safety, estimation errors tend to increase with portion size, meaning the bigger the volume you're guessing, the further off you'll be (PMC5596841). At 1 litre, a casual guess can be 150–200 ml out. That's a 15–20% error on your nutrient mix, which is enough to burn roots or starve a grow.
The cup itself feels light in the hand — thin-walled plastic, maybe 40–50 grams empty. The spout is functional rather than elegant; it pours without dribbling down the side, which is more than you can say for some kitchen jugs. The graduations are moulded into the plastic with printed numbers alongside, so you get both a tactile and visual reference. Compared to a glass measuring jug, you lose the heft and the microwave compatibility, but you gain something that won't shatter when it inevitably gets knocked off a shelf in a grow tent. For mixing nutrient solutions and measuring water volumes in a grow space, plastic wins on practicality every time.
| Method | Accuracy | Durability in a grow space | Cost |
|---|---|---|---|
| Graduated measuring cup (this product) | 100 ml intervals — reliable to approx. 50 ml | High — plastic, shatterproof | Low |
| Kitchen mug (unmarked) | Guesswork — 15–20% error at 1 litre | Medium — ceramic chips and cracks | Free (you already own one) |
| Glass lab beaker | 10–50 ml intervals — very precise | Low — one drop and it's done | Higher |
| Syringe (small volumes) | 1 ml intervals — best for small doses | High | Low, but only useful under 60 ml |
If you need to measure volumes under 50 ml — say, for a concentrated additive — a syringe is the better tool. This measuring cup is the best measuring cup for bulk liquid tasks: water for soaking substrate, nutrient solution for a reservoir, or hydrogen peroxide dilutions for sterilisation. Different tools for different scales.
It's plastic, so boiling water is a bad idea — it could warp the cup and distort the graduation markings. Warm water up to around 50–60°C is fine for most nutrient mixes. For anything hotter, use a heat-resistant glass jug.
Accurate enough for gardening and grow-room work. You're looking at roughly 50 ml margin at worst, which is well within tolerance for substrate soaking and nutrient mixing. For laboratory-grade precision, you'd need a glass graduated cylinder.
The graduations are moulded into the plastic, so the physical lines stay put. The printed numbers can fade with heavy scrubbing or prolonged exposure to acidic nutrient solutions. Rinse promptly after each use and they'll last longer.
For most standard mushroom grow kits, 1 litre is plenty — typical soaking volumes sit between 300 ml and 750 ml. If you're running multiple large monotubs simultaneously, you might want a 2-litre or 5-litre bucket alongside this cup for batch mixing.
You can, but volume measurements for dry substrates are less precise because of air gaps between particles. Pack loosely, tap the side gently, and read the level. For weight-critical mixes, a digital scale is more reliable.
Rinse with warm water immediately after use. For stubborn residue, a drop of washing-up liquid and a soft sponge does the job. Avoid abrasive scourers — they'll scratch the plastic and make the markings harder to read.
Last updated: April 2026
Medical disclaimer. This content is for informational purposes only and does not constitute medical advice. Consult a qualified healthcare provider before use of any substance.
