Vape accessories
by Storm
The Storm Water Tool Adapter is a borosilicate glass connector that lets you run your Storm vaporizer through any 14.4mm bong or bubbler. Vapour passes through water before it hits your lungs, cooling it down and filtering out particulates — turning an already smooth vape hit into something genuinely silky. If you own a Storm and a water pipe, this little adapter bridges the two worlds for the price of a decent lunch.
Running vapour through water changes the game. Dry vapour from a portable vaporizer is already leagues ahead of combustion, but it can still feel warm and scratchy on longer sessions — especially at higher temperatures. The Storm Water Tool Adapter slots into any standard 14.4mm female joint on a bong or bubbler, creating a sealed connection between your Storm vaporizer and your glassware. The vapour travels through water, drops in temperature, picks up moisture, and arrives at your mouth feeling noticeably cooler and denser.
The adapter itself weighs almost nothing and consists of three parts: a borosilicate glass male connector (the same heat-resistant glass used in lab equipment and decent bongs), a silicone rubber gasket that creates an airtight seal against your Storm's oven, and a built-in stainless steel mesh screen that stops plant material from pulling through into your water piece. Three materials, zero plastic in the vapour path — which matters when you're heating things up.
| Spec | Value |
|---|---|
| Joint size | 14.4mm (male) |
| Connector material | Borosilicate glass |
| Gasket material | Silicone rubber |
| Screen material | Stainless steel |
| Compatibility | Storm vaporizer |
| SKU | VS0121 |
Already got the adapter sorted? Make sure your water pipe is up to the job. A small bubbler with a 14.4mm joint gives you the best portability-to-filtration ratio — pair this adapter with a compact glass bubbler and your Storm becomes a proper desktop-quality setup without the desktop price tag. If your Storm's screens are looking tired, grab a set of replacement mesh screens while you're at it.
We get asked this a fair bit in the shop: "If vaporizers are already smoother than smoking, why bother with water?" Fair question. The short answer is temperature and moisture. Even at moderate heat settings — say 185°C on the Storm — the vapour leaving the oven is dry and warm. Not harsh exactly, but noticeably there. Push it above 200°C for thicker clouds and that warmth becomes genuine throat heat. Water cools the vapour by roughly 30-50% depending on the volume of water in your piece, and it adds humidity so your throat and lungs aren't dealing with bone-dry air.
The practical difference: longer sessions become comfortable. You can run the Storm at higher temperatures to extract more from your material without feeling like you've been breathing through a hairdryer. That means better efficiency from the same amount of herb, which pays for the adapter pretty quickly if you're a daily user. The one honest downside? You lose a tiny bit of flavour nuance. Water strips some terpenes along with the heat. If you're a flavour-chaser who vapes at low temps, you might prefer the dry mouthpiece. But for clouds and comfort at 195°C+, water wins every time.
The adapter is also dead simple to keep clean — the borosilicate glass doesn't stain easily, and the silicone gasket pops off for a quick soak in isopropyl alcohol. We'd recommend cleaning it every 5-7 sessions to keep airflow unrestricted. A clogged screen is the number one reason people think their adapter "stopped working" — it didn't, it just needs 2 minutes with a brush.
We've sold these since the Storm first landed, and the most common mistake is people trying to force the gasket onto the wrong part of the vaporizer. It goes over the oven opening where the mouthpiece normally sits — not over the mouthpiece itself. Sounds obvious written down, but we've had more than a few confused messages about it.
The other thing worth mentioning: the 14.4mm joint size is the smaller of the two common standards. If your bong has an 18.8mm joint (the wider one), this adapter won't fit without a glass reducer. Check your joint size before ordering. An easy way to tell: if a standard Bic pen fits snugly into the joint, it's 14.4mm. If the pen rattles around, you've got 18.8mm.
| Feature | Water Tool Adapter | Standard Dry Mouthpiece |
|---|---|---|
| Vapour temperature at lips | Noticeably cool | Warm, especially above 195°C |
| Throat comfort | Very smooth — barely feel it | Mild irritation on long sessions |
| Flavour detail | Slightly muted (water strips some terpenes) | Full terpene profile at low temps |
| Portability | Requires a water pipe — home use | Fully portable |
| Cloud density | Thicker (higher temps become comfortable) | Moderate |
| Cleaning frequency | Every 5-7 sessions | Every 3-5 sessions |
No, the silicone gasket is specifically sized for the Storm vaporizer's oven opening. It won't create a proper seal on other portable vaporizers. If you own a different device, look for a universal water pipe adapter with adjustable silicone fittings instead.
Not directly — this is a 14.4mm male connector. You'd need a separate 18.8mm to 14.4mm glass reducer to bridge the gap. They cost next to nothing and are widely available. Check your joint size before ordering.
Every 5-7 sessions, or whenever you notice reduced airflow. Soak the screen in isopropyl alcohol for 10 minutes, then brush it clean with a pipe cleaner. A clogged screen is the most common cause of poor draw resistance with this adapter.
Minimally. Water primarily filters particulates and cools the vapour. Some active compounds are water-soluble and a small fraction gets absorbed, but in practice the difference is negligible — you're losing far less than 5%. The comfort gain easily outweighs it.
Yes, and some people prefer it. Warm water adds more humidity to the vapour, which can feel gentler on your throat. Cold water cools more aggressively. Try both — it's a matter of personal preference, not performance.
It's the same type of glass used in laboratory beakers — heat-resistant and tougher than regular glass. That said, it's still glass. Don't drop it on tiles. Handle it with the same care you'd give any glass bong joint and it'll last years.
Last updated: April 2026
