Vape Wool Degummed Hemp Fibres
Vape accessories
by Black Leaf
We'll only email you about this product — no marketing.
Degummed Hemp Fibre for Dry-Herb Vaporizers
Vape Wool Degummed Hemp Fibre is a natural carrier material that lets you vaporize concentrates, hash, wax, and CBD crystals in any standard dry-herb vaporizer — without clogging the chamber or gunking up your screens. Made from mechanically processed industrial hemp, each fluffy white tuft absorbs oily or semi-solid extracts and releases vapour cleanly at high temperatures, leaving no more residue than dried herb itself.
Which Size Do You Need?
Vape Wool comes in two pack sizes. A 1.5 g pouch is roughly the size of a golf ball once pulled apart — enough for around 15–25 sessions depending on how much you tear off each time. The 10 g bag will last months of regular use and works out significantly cheaper per gram. If you vape concentrates more than a couple of times a week, go straight for the 10 g.
| Variant | Weight | SKU | Best For |
|---|---|---|---|
| Small | 1.5 g | VS0063 | Trying it out or occasional sessions |
| Large | 10 g | VS0003 | Regular use — best value per gram |
| Specification | Detail |
|---|---|
| Material | Degummed hemp fibre (industrial hemp bast) |
| Processing | Mechanical only — no chemicals or bleaching agents |
| Colour | Natural off-white (unbleached) |
| Burn Point | Above 230 °C — higher than most vape session temps |
| Taste Impact | None — flavour-neutral |
| Compatible With | Virtually all conduction and convection dry-herb vaporizers |
| Available Sizes | 1.5 g / 10 g |
| Wicking Ability | High — absorbs oily concentrates on contact |
Complete your concentrate setup with a proper dab tool for placing solid extracts onto the fibre — a stainless steel dabber gives you the precision you need without fumbling sticky hash onto your fingers. If your vaporizer's screens are looking tired, fresh stainless steel mesh screens keep airflow clean alongside the hemp fibre.
Why Degummed Hemp Fibre Saves Your Vaporizer
Drop a blob of hash oil directly into a dry-herb chamber and you'll find out the hard way what "clogged airpath" means. The concentrate melts, seeps through the screen, coats the heating element, and bakes into a tarry residue that's a nightmare to clean. We've seen customers bring in vaporizers with chambers so gummed up that no amount of isopropyl could save them. That's a pricey mistake when your vape cost three figures.
Degummed hemp fibre works as a buffer. It absorbs the liquid or semi-liquid extract, holds it in place, and releases it as vapour when heated — the same wicking principle behind cotton in an e-cigarette, except hemp handles the higher temperatures a dry-herb vape reaches (typically 180–220 °C). The fibre's burn point sits above 230 °C, so it won't scorch or combust during a normal session. After you're done, you pull out the spent fibre and toss it. The chamber stays clean. No scraping, no soaking, no swearing.
One honest limitation: hemp fibre isn't magic. If you overload it with concentrate — we're talking a saturated, dripping lump — some oil will still seep through. Use a piece roughly the size of your chamber, apply a modest amount of extract, and you'll get a clean session every time. Less is more here.
What Degummed Hemp Fibre Actually Is
It looks like a fluffy white cotton ball, but it's not cotton. Degummed hemp fibre comes from the bast (outer woody layer) of industrial hemp stalks. "Degumming" refers to the removal of pectins and lignins that bind the fibres together — in this case done entirely through mechanical processing, with zero chemical solvents, bleach, or artificial additives involved. The natural off-white colour you see is the actual colour of the cleaned fibre, not a dye job.
This is the same raw material that gets spun into yarn for hemp textiles — your hemp t-shirt started life looking exactly like this. The fibres have a naturally high cellulose content (around 70%), which gives them excellent wicking ability and thermal stability. When you hold a tuft between your fingers, it feels slightly coarser than cotton, almost papery, with a faint earthy smell that disappears entirely once heated. In the vapour itself, you'll taste nothing but your extract.
How to Use Degummed Hemp Fibre in Your Vaporizer
- Tear off a small piece of fibre — roughly the size of your vaporizer's herb chamber. Don't pack it tight; you want it fluffy enough for air to pass through.
- For liquid or oily concentrates (oils, tinctures, runny wax): dip the fibre directly into the extract, or use a dab tool to drip a small amount onto the fibre. Let it absorb for 5–10 seconds.
- For solid or semi-solid concentrates (hash, budder, shatter, CBD crystals): place a rice-grain-sized piece of extract onto the fibre using a dab tool. Gently fold or press the fibre around it so the concentrate sits in the centre, surrounded by hemp.
- Place the loaded fibre into your dry-herb chamber. Don't compress it — airflow is critical for even vaporization.
- Set your vaporizer to your usual concentrate temperature (190–210 °C works well for most extracts). Draw slowly. The fibre wicks the melting concentrate and releases it as vapour.
- After the session, remove the spent fibre and discard it. A quick brush of the chamber is all the cleaning you'll need.
One tip from behind the counter: if you're vaping hash specifically, crumble it as finely as you can before placing it on the fibre. Solid chunks take longer to melt through, and you'll end up with uneven heating and wasted material. A fine crumble distributes across the fibre's surface area and vaporizes more completely.
Hemp Fibre vs. Cotton vs. Concentrate Pads
You might wonder why you can't just use regular cotton wool from the bathroom cabinet. Three reasons. First, most cosmetic cotton is bleached with chlorine or hydrogen peroxide — not something you want to inhale at 200 °C. Second, cotton has a lower thermal tolerance and can singe at vaping temperatures, leaving an acrid taste. Third, cotton compresses too easily, which chokes airflow in a small herb chamber.
Some vaporizer brands sell proprietary concentrate pads — small steel-mesh or ceramic inserts designed for the same purpose. These work, but they're brand-specific, they cost more per session over time, and they still need regular cleaning. Degummed hemp fibre is universal (fits any chamber you can physically pack), disposable, and dirt cheap. The 10 g bag gives you months of sessions. If your vape came with a concentrate pad and you like it, great — keep using it. But for versatility and value, hemp fibre is the best carrier material for dry-herb vaporizers we've come across.
Frequently Asked Questions
Does degummed hemp fibre affect the taste of my vapour?
No. The fibre is flavour-neutral and odourless once heated. You'll taste only the terpenes and flavour profile of whatever extract you've loaded. We've tested it side-by-side with proprietary concentrate pads and couldn't tell the difference.
Can I reuse a piece of hemp fibre for multiple sessions?
Technically yes, but we wouldn't. After one session the fibre is spent — it's absorbed the extract and released it as vapour. Reusing it gives you a weak, stale-tasting draw. At the amount you use per session (a pinch), a 1.5 g pouch lasts 15–25 sessions. Just use a fresh piece.
Will hemp fibre work in a conduction vaporizer like the DynaVap?
Yes. Tear off a piece that fits the tip chamber, load your concentrate onto it, and cap as normal. Conduction vapes heat the fibre directly, which actually works brilliantly — the extract melts into the hemp and vaporizes evenly. It's one of the best ways to run hash through a DynaVap without making a mess.
Is this the same as vape cotton used in e-cigarettes?
No. E-cigarette cotton (like Muji or Cotton Bacon) is designed for lower-temperature coil builds and saturated e-liquid wicking. Degummed hemp fibre has a higher burn point (above 230 °C) and is specifically suited to the dry-heat environment of a herb vaporizer. Don't swap one for the other.
Can I use degummed hemp fibre with CBD crystals?
Absolutely — it's one of the most common uses. Place your CBD isolate crystals onto a small piece of fibre, fold gently, and load into your chamber at around 200 °C. The crystals melt into the fibre and vaporize cleanly. No sticky residue left behind.
How much concentrate should I load onto each piece of fibre?
A rice-grain-sized amount for solid concentrates, or 2–3 drops for liquids. Overloading saturates the fibre and lets oil seep through to the chamber — exactly what you're trying to avoid. Start small; you can always reload.
Is degummed hemp fibre safe to inhale through?
The fibre is 100% natural hemp, mechanically processed with no chemical treatments, bleaches, or additives. At standard vaping temperatures (180–220 °C), it doesn't combust or release visible particulates. It's the same textile-grade hemp bast used in clothing manufacturing.
Last updated: April 2026
