Vape accessories
by Vapman
The Vapman spare middle piece is a hand-finished wooden component that sits between the herb chamber and your mouth, housing the filter that stops ground material from reaching your lips. Made from olive wood with a stainless-steel inner layer and pre-installed filter, it's a direct drop-in replacement for Vapman 2.0 and Click vaporizers — no fiddling, no fitting issues, just your vape working properly again.
| Spec | Value |
|---|---|
| Material (outer) | Natural olive wood, hand-finished |
| Material (inner) | Stainless steel |
| Filter | Pre-installed |
| Compatibility | Vapman 2.0, Vapman Click |
| SKU | VS0432 |
| Variant | Olive Wood |
| Assembly required | None — fully assembled |
If you're replacing the middle piece, it's worth checking whether your Vapman's other parts need attention too. The Vapman itself — both the 2.0 and the Click — is available in our vape accessories section, along with replacement filters and cleaning supplies. A fresh middle piece paired with a new filter screen brings the whole setup back to factory performance.
The middle piece on a Vapman does more work than most people realise. It's the barrier between finely ground herb and your airway. Without it — or with a cracked, warped, or missing one — you're inhaling plant particles directly. That's not just unpleasant; it defeats the purpose of vaporising in the first place. You bought a Vapman for clean, flavourful vapour, and the middle piece is what delivers that.
We've seen customers try all sorts of workarounds: rolled-up screens, bits of cotton, even tiny pebbles jammed in there. None of it works properly, and some of it is genuinely unsafe. The original middle piece is precision-shaped to create the right airflow resistance. Too loose and herb flies through; too tight and you can't draw at all. The tolerances on these hand-finished pieces are surprisingly tight for something made from natural wood — each one is turned and fitted individually, which is why they slot in without any play or wobble.
One honest limitation: because these are natural olive wood, each piece has slightly different grain patterns and colouring. That means your replacement might not be an exact visual match to your original Vapman body. Functionally identical, aesthetically unique. If anything, the slight mismatch gives your vape a bit of character — like a well-loved tool that's been repaired and kept going.
A lot of portable vaporisers use generic silicone or plastic parts that you can bodge together from hardware-shop supplies. The Vapman is different. Every component is specific to the device, and the middle piece in particular is where the Swiss-made craftsmanship actually matters. The stainless-steel inner layer prevents the wood from charring over time, while the olive wood exterior stays cool enough to touch comfortably — even after extended sessions. Pick one up and you can feel the density of the wood; it's got a satisfying weight for something so small, about the size of a pencil eraser.
Compared to something like the DynaVap condenser (which serves a roughly similar filtering function), the Vapman middle piece is a more elegant solution — fewer parts, no O-rings to degrade, and the natural wood adds genuine flavour character rather than the metallic taste you sometimes get from all-steel airpaths. The trade-off is that wood is more fragile than steel, which is exactly why this replacement part exists. If you've snapped yours while cleaning or lost it during disassembly, you're not alone — it's the single most-replaced part on any Vapman.
Yes. It arrives fully assembled with a stainless-steel inner layer and filter in place. No extra parts needed — just press it into your Vapman body and you're ready to go.
It's designed for the Vapman 2.0 and Vapman Click models. If you have a pre-2.0 Classic, the dimensions may differ. Check with the manufacturer or compare your existing piece before ordering.
With regular cleaning, a middle piece lasts months or even years. Replace it when the filter clogs beyond cleaning, the wood cracks, or airflow drops noticeably despite maintenance. Most people replace theirs after accidental damage, not wear.
Absolutely. Soak it briefly in isopropyl alcohol (90%+), then rinse with warm water and let it dry completely before reinserting. Replace only when cleaning no longer restores proper airflow or the wood is physically damaged.
Olive wood is dense, heat-resistant, and naturally antibacterial. It also adds a subtle warmth to the vapour flavour that plastic or silicone parts can't match. Each piece has unique grain patterns — that's the nature of real wood, not a defect.
The optimal load is around 0.2g of finely ground herb. That's enough for 1-2 solid draws. The Vapman is built for microdosing-style sessions — small loads, full extraction, no waste.
Yes. Stainless steel is the standard material for medical and food-grade heat applications. It doesn't off-gas at the temperatures a Vapman operates at, and it protects the wood from direct heat exposure.
Last updated: April 2026
